Garmin MSC™ 10 Marine Satellite Compass – Black
Model: 010-02407-10
- Built-in attitude and heading reference system to filter and smooth GPS-derived heading
- Seamlessly transition from GPS-based to magnetometer-based heading if you lose satellite signal (magnetometer calibration required for backup magnetic heading support)
- Get accurate heave information right on your chartplotter through the NMEA 2000® network
- Multi-band GNSS (L1 and L5 GPS) receiver delivers accurate positioning within 1 meter; heading accuracy of 2-degree RMS in dynamic situations
- Use as the primary sensor for autopilots and other onboard systems
- Works with multiple satellite constellations for faster, more reliable positioning
- Compact device is simple to install with no calibration required, unless using magnetometer-based heading
- Easily integrates into your Garmin marine ecosystem
- 10 Hz position update rates for high-sensitivity tracking
Know exactly where you’re headed with the MSC™ 10 marine satellite compass. Easily install this GPS-based heading sensor with a fully integrated attitude and heading reference system for better GPS heading at high speeds. The multi-band GNSS (L1 and L5 GPS) receiver enables position accuracy to within 1 meter. Plus, the GPS-based compass won’t be impacted by magnetic interference. It can even deliver boat heave information to your chartplotter via the NMEA 2000® network. You can also use MSC™ 10 as the primary sensor for autopilots and all your onboard systems that need accurate heading information.
What’s in the Box:
- MSC™ 10 Marine Satellite Compass – Black
- Pole mount
- Mounting hardware
- NMEA 2000® backbone/drop cable (6 meters)
- NMEA 2000 T-connector
- Documentation
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
