NavPod RMX4405 RailMount NavPod Pre-Cut for Furuno GP1670 / 1670F 5.7″
RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1": or 1.25" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.
| H | W | D | |
| Overall Size | 9" | 10.2" | 6" |
| Usable Face | 5.6" | 8.9" | 3.75" |
| Max Cutout | 4.625" | 8" |
All RailMount NavPods include
- Acrylic capped ABS plastic
- Chromed stainless steel tamper-proof fasteners
- Double Seal for watertight integrity
- Models are available pre-cut for popular electronics.
- Chromed stainless steel arm with swivel mount
- Both sets of adaptors included for 1" or 1.25" diameter tubing
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
